R.B.S.L. V2's are here!!!!

New V2 Offset rod ends(7075 Aluminum)and V2 Pivot Balls(Stainless Steel) designed in house, give added strength, clearance and style to the R.B.S.L. !!! There are 3 sizes of pivot balls that will all fit the same new V2 Rod End. M2.5, M2, M1.4. These are small on one side and bigger on the other, when installed correctly, the rod ends will never come off! This R.B.S.L. is for the MOFO X15 Axles and is supplied with m2.5 pivot balls for the knuckles.

Choose your pivot ball size for the servo horn, M1.4, M2 or M2.5.

Step away from the square edge steering links and step towards the R.B.S.L. for your MOFO X15 Axles This steering link has 15-5mm or 13-6mm sealed and oiled bearings! This dramatically reduces the risk of hang-up from a square edged steering links. Now the R.B.S.L allows you to slide over the hang ups giving you that flow in your ride. Hardware is included.

 Added benefits 

Zero drag steering link- No edges to get caught on here. 15/13 sealed and oiled bearings  give no resistance to glancing edges

Adjustable drag link - no more offsetting of your steering rate from off center servos

 Adjustable Toe-In / Toe -Out - most aftermarket parts aren't too off but some are. Now you can adjust Toe angle if needed. They are 4 full turns in either directions on the tie rod ends for a few degrees of adjustment. 

 For rock crawling Toe-out gives you a better initial turn in on corner entry but will make the truck unstable under acceleration(faster trucks) on the straights and on bumpy tracks

 Toe-in will reduce steering when entering a corner but improves steering response on corner exit under acceleration(faster trucks)

A slight 1° toe out would be good for our slow crawlers.

 But have fun trying the different setups. Every truck setup is different so one might work better for your terrain or setup.

Added weight - R.B.S.L 5mm - 9 grams   

                          R.B.S.L. 6mm 10 grams              

Flow Your Ride!

R.B.S.L. comes with a 6 month warranty